Pupitre d’appel 8 zones View larger

Source selector board compatible with the T-8000 digital audio matrix

T-8000C

3701567901607

00945

RONDSON

Source selector board compatible with the T-8000 digital audio matrix

More details

In Stock

Delivered within 48/72h

For professionals

To log in

For individuals

Contact us

Characteristics :

  • The T-8000C and T-8000D are remote control boards that are connected to the T-8000 Matrix via standard universal CAT 5 cable when there is a need to adjust the volume of sources or make calls from remote locations in the matrix.
  • Each control matrix has 8 x RJ-45 sockets for remote control from the preamp module.
  • CAT 5 cabling is used because of cost, ease of installation, but also because it integrates RJ 485 communication, audio transmission and 24 V power supply at the same time.
  • This family of modules also includes a more complex model the T-8000B
  • LED area display and up and down buttons, volume potentiometer for adjusting the general output level (T-8000C)
  • 2 XLR microphone remote control inputs with volume and tone control and music priority for calls (T-8000D)
  • DC 24V power supply provided by the matrix, low power consumption 5 W
  • Operating principle analogue/digital conversion to adjust the matrix volume
SPECIFICATIONST-8000CT-8000D     
Serial communication speed4800 bps4800 bps
Serial communication distance1 Km maximum1 Km maximum  
Microphone input sensitivity5 mV /600 Ω
Audio output0 dB / 600 Ω
Frequency Response

100 Hz - 18 000 Hz (± 1 dB)     

Signal to Noise Ratio

MIC > 65 dB

Distortion at 1 KHz< 0.1 %
Settings VolumeVolume
Power supply24 V DC24 V DC
Power consumption5 W5 W
Dimensions (W x D x H)86 x 33 x 86 mm146 x 33 x 86 mm
Weight300 g150 g

7 Products of the same categories :

Subscribe to the newsletter

Receive information on new products and products of the moment.