Adaptateur réseau IP avec ampli 120 W View larger

Wall-mounted amplifier with an IP 60 W network adapter

3701567910357

02402

RONDSON

60 W wall-mounted mixing amplifier over IP

More details

  • 60 W

This product is no longer in stock

For professionals

To log in

For individuals

Contact us

Description :

This 60 W RMS amplifier-preamplifier is equipped with an IP network adapter (1).
It offers 100 V and 70 V speaker outputs as well as 4-16 Ω (in Low Impedance).
It operates on 230 V mains.

It works exclusively with the IP AM IP SOFTWARE software.
(1) Internet protocol (abbreviated to IP)

Characteristics :

  • High quality TCP/IP digital audio transmission, can transmit 16-bit stereo CD sound quality.
  • Infrared remote control to control the content during playback, simple operation such as play / pause, fast forward / fast rewind, AB repeat
  • DSP audio processing technology, high-speed chip reduces start-up time to less than a second
  • One AUX input and one MIC input, with independent volume control, treble and bass control, support networkless paging
  • 1 SHORT IN port short circuit to trigger the emergency public address
  • Intelligent built-in power management, automatically turns off amplifier power when no signal input, power amplifier, and automatically turns on when there is an audio signal input, preset the program to get this function
  • Integrated audio processing supporting multi-channel signal amplification and mixing, supporting three types of audio priority management
  • Free digital audio control, multifunctional combination and partition, local broadcast function
  • Built-in alarm cut-off function, no forced cut-off 24 V, not limited to the amount of volume settings, 3-line connection
  • Power management, when there is no music or calls the unit goes into stand-by mode automatically.
  • Stand-by consumption is less than 3%, which is in line with energy-saving standards
  • Each MIC, AUX and network source has an individual volume control.
SPECIFICATIONS

AM 60 IP-WP

Type

Wall-mounted amplifier with IP network adapter

Power supply

AC 230 V - 50 Hz

Output power

60 W RMS

Speaker Outputs

4 -16 Ω / 70 - 100 V

Internet socket

RJ 45

Transmission speed

100 Mbps

Support

TCP / IP, UDP, IGMP (Group Broadcast)

Sound format

MP3 / MP2

Sound quality

Qualité CD stéréo 16 bits

Sampling

8 K - 48 KHz

Capacity

8 K - 512 Kbps

Inputs/Sensitivity

1 - MIC : 5 mV - 1 - AUX : 350 mV

Signal-to-noise ratio

≥ 80 dB

Frequency Response

60 Hz – 18000 Hz (± 3 dB)

THD Distortion

≤ 1 %

Consumption

80 W

Protection

Overheating, overload, short circuit,

AC mains current protection

Operating Temp.

-25 °C - 65 °C

Humidity

20 % - 80 %

Dimensions (W x D x H)

273 x 250 x 87,5 mm

Weight

6,4 kg

Accessories

Subscribe to the newsletter

Receive information on new products and products of the moment.