Standard 100V preamplifier amplifiers
These amplifiers - preamplifiers are available in 3 powers :
Reference: AM 20N - Code: 00502
Reference : AM 40N - Code : 00503
Reference : AM 60N - Code : 00504
Available
Delivered within 48/72h
For professionals
To log inFor individuals
Contact usDescription:
These amplifiers - mixers are available in 3 powers: 20 W, 40 W and 60 W.
They include loudspeaker outputs in 100V, 70V and 25V, as well as 8 Ω in Low Impedance.
They operate on mains (230 V) or DC 12 V for AM 20N, AM 40N and DC 24 V for AM 60N.
Characteristics:
They are equipped with :
- 1 balanced DIN-JACK-XLR microphone input MIC1 (priority) via talkover or remote control.
- 1 balanced microphone input (JACK-XLR) MIC2.
These 2 inputs can be switched to phantom-powered microphone (internal operation), a chime (2 tones "ding dong") can be activated by the MIC1 microphone connected to the 5-pin DIN socket (RONDSON PA 100D call station) or to the stereo jack socket on the front panel (PA 100J call station).
- 1 telephone input, super priority emergency message
- 1 RCA AUX input (Tuner, K7, CD, etc.)
- 1 modulation output for connection of a power unit
| SPECIFICATIONS | AM 20N | AM 40N | AM 60N | ||||
| Type | Amplifier-preamplifier | ||||||
Power supply | AC 115 V/230 V - 50/60 Hz - switchable ±10 %. DC 12 V (maximum deviation 10 %) | AC 115 V/230 V - 50/60 Hz - switchable ±10 %. DC 12 V (maximum deviation 10 %) | AC 115 V/230 V - 50/60 Hz - switchable ±10 %. DC 24 V | ||||
Output power | 20 W RMS 30 W MAXI | 40 W RMS 60 W MAX | 60 W RMS 90 W MAX | ||||
Speaker outputs | 8 Ω - 25 V – 70 V - 100 V | ||||||
Line Output | 1 V, 600 Ω | ||||||
Inputs | MIC 1 - 2: 1 mV, 250 Ω symmetrical power supply. configurable phantom power supply AUX: 200 mV, 47 kΩ asymmetrical TEL: 0.1 to 1 V, 600 Ω, symmetrical, adjustable | ||||||
Frequency Response | MIC 1 – 2 : 60 Hz – 15 000 Hz ± 3 dB AUX : 60 Hz – 15 000 Hz ± 3 dB TEL : 100 Hz – 15 000 Hz ± 3 dB | ||||||
Total harmonic distortion | Less than 1% at 1 kHz at RMS power | ||||||
Signal to Noise Ratio | All CCN volume settings : 75 dB below nominal power MIC 1 - 2: 60 dB below RMS power AUX: 70 dB below RMS power TEL: 70 dB below RMS power | ||||||
Tone Settings | Bass : ± 10 dB à 100 Hz - Treble : ± 10 dB à 10 kHz | ||||||
Settings | MIC 1 - 2: volume control AUX: Volume control Tone: Bass and treble TEL: entry level CHIME: inter ON/OFF 115 V/230 V: voltage switch | ||||||
Display | Power on indicator light | ||||||
Consumption | Mains : 60 W Battery : 3 A | Mains : 100 W Battery : 4 A | Mains : 170 W Battery : 5 A | ||||
Chime | 2 tone Ding Dong preceding 1 microphone call | ||||||
Priority | By detection / MIC 1 connected to DIN or Jack | ||||||
Priority levels | TEL/EMER MIC 1 MIC 2 AUX 3 2 1 1 | ||||||
Dimensions (W x D x H) | 272 x 300 x 88 mm | ||||||
Weight | 4,2 kg | 5.7 Kg | 7.2 Kg | ||||
Option 19" rack mounting 2 U | Mounting brackets EQ 2040 | ||||||
