View larger 
Standard 100V amplifiers preamplifiers
These amplifiers are available in 4 powers :
Reference: AM 30A - Code: 00510
Reference: AM 60A - Code: 00511
Reference: AM 120A - Code: 00512
Reference : AM 240C - Code : 00826
For professionals
To log inFor individuals
Contact usDescription :
These mixing amplifiers are available in 4 powers: 30 W, 60 W, 120 W and 240 W.
They include 100 V, 70 V and 25 V loudspeaker outputs, as well as 8 Ω (Low Impedance).
They operate on mains (230 V) or DC (24 V).
Features :
They are equipped with :
- 1 balanced DIN-JACK-XLR MIC1 balanced microphone input (priority) via talkover or remote control.
- 2 balanced microphone inputs (JACK-XLR) MIC2 and MIC3
All three inputs can be switched to phantom-powered microphones (internal operation), the MIC 3 can be switched online, a chime (2-tone "ding dong") can be activated by the MIC 1 microphone connected to the 5-pin DIN socket (PA 100D Call Microphone Panel) or to the stereo jack on the front panel (PA 100J Panel).
- 1 telephone input, super priority emergency message
- 2 RCA AUX inputs (Tuner, K7, CD, etc.)
- 1 input and output for equalizer or power unit
- 1 recording output for tape recorder
- HP outputs on terminal block BI 8 Ω, HI 25 V, 70 V or 100 Volts
- 1 cooling fan
| SPECIFICATIONS | AM 30A | AM 60A | AM 120A | AM 240C | |||||
| Type | Amplifier-preamplifier | ||||||||
Power supply | AC 115 V/230 V - 50/60 Hz ±10 % - switchable DC 24 V (maximum deviation 10 %) | ||||||||
Output power | 30 W RMS 45 W MAX | 60 W RMS 90 W MAX | 120 W RMS 180 W MAX | 240 W RMS | |||||
Speaker outputs | 8 Ω - 25 V - 70 V - 100 V | ||||||||
Output Recording - PARE | 350 mV, 4,75 KΩ | ||||||||
Line Output - PRE OUT | 1 V, 600 Ω | ||||||||
Inputs | MIC 1 to 3: 1 mV, 250 Ω symmetrical phantom powering configurable AUX 1: 200 mV, 47 KΩ, asymmetrical AUX 2: 500 mV, 47 KΩ, asymmetrical LINE (Mic 3): 200 mV, 47 KΩ, symmetrical TEL: 0.1 to 1 V, 600 Ω, symmetrical, adjustable Power In: 1 V, 47 KΩ, asymmetrical | ||||||||
Frequency Response | MIC 1 à 3 : 60 Hz – 15 000 Hz ± 3 dB AUX 1 - 2 : 60 Hz – 15 000 Hz ± 3 dB TEL : 100 Hz – 15 000 Hz ± 3 dB | ||||||||
Total harmonic distortion | Less than 1% at 1 kHz at RMS power | ||||||||
Signal to Noise Ratio | All CCW volume settings: 75 dB below rated power MIC 1 to 3: 60 dB below RMS power AUX 1 - 2: 70 dB below RMS power TEL: 70 dB below RMS power | ||||||||
Tone Settings | Bass : ± 10 dB à 100 Hz - Treble : ± 10 dB à 10 kHz | ||||||||
Settings | MIC 1 to 3: volume control AUX 1 - 2: volume control MASTER volume control Tonality: Low and high notes TEL: input level Mic 3 (Line/Mic): switch CHIME: inter ON/OFF 115 V/230 V: voltage switch | ||||||||
Consumption | Sector : 90 W Battery: 2 A | Sector : 170 W Battery: 4 A | Sector : 360 W Battery: 8 A | Power supply : 720 W Battery: 16 A | |||||
Chime | 2 tones Ding Dong preceding 1 microphone call | ||||||||
Priority | By detection / MIC 1 connected to DIN, Jack or XLR | ||||||||
Priority levels | TEL/EMER 3 | MIC 1 2 | MIC 2 1 | AUX/CD 1 | |||||
Dimensions (W x D x H) | 430 x 260 x 88 mm | ||||||||
Weight | 6,5 kg | 8 kg | 9,5 kg | 13 kg | |||||
Option montage rack 19" 2 U | Mounting brackets EQ 2000 | ||||||||
