View larger 
Amplifier preamplifier 60W in 100V
60W preamplifier amplifier
On-line 70 and 100 volts
DC 24V
Pour les professionnels
Se connecterPour les particuliers
Nous contacterThis mixing amplifier is available in 1 power of 60W.
It offers 100V and 70V loudspeaker outputs as well as in 8Ω in Low Impedance.
It operates on 115/230 V - 50/60 Hz or DC 24V mains.
It is equipped with 5 inputs with volume control on the front panel:
- 2 x microphones - XLR balanced
- 1 x MIC XLR switchable TEL on terminal block
- 2 x MIC XLR switchable AUX RCA
- 1 adjustable RCA auxiliary input on the rear panel
- 1 recording output (TAPE OUT)
- 1 AUX OUT output
- HP outputs on 70 and 100 V and 8 Ω screw terminal block in low impedance
- Thermal protection, overload and short-circuit protection
- Rack mounting brackets 19″ 2U
| SPECIFICATIONS | PA-60 |
| Type | Amplifier Preamplifier |
| Power supply | AC 115 V/230 V – 50/60 Hz DC 24 V |
| Output power | 60 Watts RMS |
| Outputs | Speaker outputs: speech and music 8 Ω, 70 V, 100 V Tape Output: 1 V 150 Ω Aux Output: 1 V 150 Ω |
| Inputs | Input 1 to 3: MIC 600 Ω, 1 mV, XLR symmetrical Tel: 600 Ω, 100 mV, terminal block Input 4: MIC 600 Ω, 1 mV, XLR symmetrical AUX 1: 100 mV, 22 K Ω Input 5: MIC 600 Ω, 1 mV, XLR symmetrical AUX 2: 100 mV, 22 K Ω Input 6: AUX 3: 100 mV, 22 K Ω |
| Frequency Response | 50 – 15000 Hz ± 3 dB |
| Total harmonic distortion | Less than 1% at 1 KHz |
| Signal to Noise Ratio | 86 dB |
| Indicators | Power indicator (LED) Output level indicator (6 LEDs) |
| Phantom power supply | Adjustable on inputs 1 to 5 "OFF". Phantom power output 16 V |
Tone Settings | Bass : ± 10 dB at 100 Hz Treble : ± 10 dB at 10 KHz |
| Consumption | AC : 160 W DC : 4A |
| Priority | By detection / MIC 1 (attenuation from 0 to 30 dB) |
| Dimensions W x D x H | 425 x 305 x 88 mm |
| Weight | 8 Kg |
| Accessory | 19" 2U rack mounting brackets |
