View larger

Class-D Power Amplifiers

Reference :

Brand :

Class-D power amplifiers available in 2 powers :

Reference : DA-500DP - Code : 02485

Reference : DA-1000DP - Code : 02486

In Stock

Delivered within 48/72h

For professionals

For individuals

CHARACTERISTICS

Variable speed automatic fan (thermal sensor)
100V outputs for HP line
Class-D: the amplifier offers a small size with a light weight
Designed to run on AC mains or 24V DC battery
Optional fault monitoring module (FD 200) for monitoring amplifiers and loudspeaker lines (short-circuit and open-circuit failures)
A level reset relay contact on the output terminal block allows, in case of emergency, the broadcasting of calls on 3 or 4-wire lines that need a 24VDC power supply.
RMS output powers: 500 W x 2 and 1000 W
The optional fault monitoring module enables the switchover to a standby amplifier or loudspeaker line in the event of an amplifier or loudspeaker line failure if the FS-3381 switching system is connected in between.
Total protection for reliability
Overload protection circuit and short-circuit limiter
Overvoltage protection circuit
Input level: 0 dBu°(0.775V) 60 KΩ balanced (2 inputs)
Power-on noise reduction circuit
Audio Priority input terminal and remote control terminal Priority
200 Hz high-pass filter to improve sound quality
Signal inputs on screw terminal block for easy installation

SPECIFICATIONS		DA-500DP (CODE 02485)	DA-1000DP (CODE 02486)
RMS output power		2 X 500 W	1000 W
Power consumption		1250 W	1250 W
Power consumption 230 V	1/8 of the power	2,8A/1,4A	5,6A/2,8A
	1/3 of the power	4,4A/2,2A	8A/4A
	Power rating	6,8A/3,4A	13A/6,6A
Weight		18 Kg	21,5 Kg
Output impedance	100 V	20 Ω 10 Ω
Frequency Response		40 Hz – 18 000 Hz -3dB
Signal-to-noise ratio		>100 dB
Harmonic distortion		< 0,5 %
High Pass Filter		200 Hz / -3dB
Input Sensitivity/Impedance (PGM, PRIORITY)		0 dBu (0,775V) / 60 KΩ symmetrical
Power supply		AC 230V / 50 Hz / DC 24 V
Dimensions (mm)		483 x 375 x 88 mm (2 U)