Naturally cooled amplifier 120W in 100V

Name: Naturally cooled amplifier 120W in 100V
Brand: JD-MEDIA
SKU: PA 3120

Reference : PA 3120

SKU : 01153

Amplifier of 120W in line 100V

Power output

120 W

Zones

PA 3120 / PA 3140

Description

CHARACTERISTICS

Input level: 0 dBu (0.775V) 60 KΩ balanced1 PROGRAM, 1 PRIORITY AND 1 SLAVE INPUT
Total protection for product reliability: overload and short circuit on the line, overvoltage limiting circuit
200 Hz filter to improve sound quality in resonant spaces
Speaker outputs 25 V, 35 V, 50 V, 70 V and 100 V
Inputs on screw terminal block for easy installation
Soft start circuit for soft start
Mains or 24 V DC operation
24 V DC output for external devices (max. 500 mA)
Easy to install optional fault detector module (FD-200) for monitoring amplifier and speaker lines (short circuit, open) faults
Optional monitoring relay contact module (FM-300) easy to install to monitor AC power, DC fuse relay fault, battery disconnected
Audio priority and priority control terminal block
Priority relay contact on the output terminal block for emergency messages via a 3-wire or 4-wire DC-powered cable

SPECIFICATIONS	PA 3120 (code 01153)
Input Sensitivity/Impedance	0 dBu (0.775 mV) / 60 K symmetrical
High-pass filter	200 Hz / -3dB
Frequency Response	35 Hz – 20 000 Hz ± 3 dB
Signal to Noise Ratio	>100 dB
Harmonic distortion	<0,4 % at 1 KHz
RMS / MAX output power	120 W / 180 W
Power consumption	330 W
Power supply	AC 230V / 50 Hz / DC 24 V
Dimensions (W x D x H)	420 x 377 x 133 mm (3 U)
Weight	15,5 Kg
Output / Impedance	25 V : 5,2 Ω 50 V : 20,8Ω 100 V : 83,3 Ω